#ifdef USE_ESP32

#include "esphome/core/defines.h"
#ifdef USE_ESP32_CRASH_HANDLER

#include "crash_handler.h"
#include "esphome/core/log.h"

#include <cinttypes>
#include <cstring>
#include <esp_attr.h>
#include <esp_private/panic_internal.h>
#include <soc/soc.h>

#if CONFIG_IDF_TARGET_ARCH_XTENSA
#include <esp_cpu_utils.h>
#include <esp_debug_helpers.h>
#include <xtensa_context.h>
#elif CONFIG_IDF_TARGET_ARCH_RISCV
#include <riscv/rvruntime-frames.h>
#endif

static constexpr uint32_t CRASH_MAGIC = 0xDEADBEEF;
static constexpr size_t MAX_BACKTRACE = 16;

// Check if an address looks like code (flash-mapped or IRAM).
// Must be safe to call from panic context (no flash access needed).
static inline bool IRAM_ATTR is_code_addr(uint32_t addr) {
  return (addr >= SOC_IROM_LOW && addr < SOC_IROM_HIGH) || (addr >= SOC_IRAM_LOW && addr < SOC_IRAM_HIGH);
}

#if CONFIG_IDF_TARGET_ARCH_RISCV
// Check if a code address is a real return address by verifying the preceding
// instruction is a JAL or JALR with rd=ra (x1). Called at log time (not during
// panic) so flash cache is available and both IRAM and IROM are safely readable.
static inline bool is_return_addr(uint32_t addr) {
  if (!is_code_addr(addr) || addr < 4)
    return false;
  // A return address on the stack points to the instruction after a call.
  // Check for 4-byte JAL/JALR call instruction before this address.
  // Use memcpy for alignment safety — RISC-V C extension means code addresses
  // are only 2-byte aligned, so addr-4 may not be 4-byte aligned.
  uint32_t inst;
  memcpy(&inst, (const void *) (addr - 4), sizeof(inst));
  // RISC-V instruction encoding: bits [6:0] = opcode, bits [11:7] = rd
  uint32_t opcode = inst & 0x7f;  // Extract 7-bit opcode
  uint32_t rd = inst & 0xf80;     // Extract rd field (bits 11:7)
  // Match JAL (0x6f) or JALR (0x67) with rd=ra (x1, encoded as 0x80 = 1<<7)
  if ((opcode == 0x6f || opcode == 0x67) && rd == 0x80)
    return true;
  // Check for 2-byte compressed c.jalr before this address (C extension).
  // c.jalr saves to ra implicitly: funct4=1001, rs1!=0, rs2=0, op=10
  if (addr >= 2) {
    uint16_t c_inst = *(uint16_t *) (addr - 2);
    if ((c_inst & 0xf07f) == 0x9002 && (c_inst & 0x0f80) != 0)
      return true;
  }
  return false;
}
#endif

// Raw crash data written by the panic handler wrapper.
// Lives in .noinit so it survives software reset but contains garbage after power cycle.
// Validated by magic marker. Static linkage since it's only used within this file.
// Version field is first so future firmware can always identify the struct layout.
// Magic is second to validate the data. Remaining fields can change between versions.
// Version is uint32_t because it would be padded to 4 bytes anyway before the next
// uint32_t field, so we use the full width rather than wasting 3 bytes of padding.
static constexpr uint32_t CRASH_DATA_VERSION = 1;
struct RawCrashData {
  uint32_t version;
  uint32_t magic;
  uint32_t pc;
  uint8_t backtrace_count;
  uint8_t reg_frame_count;  // Number of entries from registers (not stack-scanned)
  uint8_t exception;        // panic_exception_t enum (FAULT/ABORT/IWDT/TWDT/DEBUG)
  uint8_t pseudo_excause;   // Whether cause is a pseudo exception (Xtensa SoC-level panic)
  uint32_t backtrace[MAX_BACKTRACE];
  uint32_t cause;  // Architecture-specific: exccause (Xtensa) or mcause (RISC-V)
};
static RawCrashData __attribute__((section(".noinit")))
s_raw_crash_data;  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)

// Whether crash data was found and validated this boot.
static bool s_crash_data_valid = false;  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)

namespace esphome::esp32 {

static const char *const TAG = "esp32.crash";

void crash_handler_read_and_clear() {
  if (s_raw_crash_data.magic == CRASH_MAGIC && s_raw_crash_data.version == CRASH_DATA_VERSION) {
    s_crash_data_valid = true;
    // Clamp counts to prevent out-of-bounds reads from corrupt .noinit data
    if (s_raw_crash_data.backtrace_count > MAX_BACKTRACE)
      s_raw_crash_data.backtrace_count = MAX_BACKTRACE;
    if (s_raw_crash_data.reg_frame_count > s_raw_crash_data.backtrace_count)
      s_raw_crash_data.reg_frame_count = s_raw_crash_data.backtrace_count;
    if (s_raw_crash_data.exception > 4)  // panic_exception_t max value
      s_raw_crash_data.exception = 4;    // Default to PANIC_EXCEPTION_FAULT
    if (s_raw_crash_data.pseudo_excause > 1)
      s_raw_crash_data.pseudo_excause = 0;
  }
  // Clear magic regardless so we don't re-report on next normal reboot
  s_raw_crash_data.magic = 0;
}

bool crash_handler_has_data() { return s_crash_data_valid; }

// Look up the exception cause as a human-readable string.
// Tables mirror ESP-IDF's panic_arch_fill_info() which uses local static arrays
// not exposed via any public API.
static const char *get_exception_reason() {
#if CONFIG_IDF_TARGET_ARCH_XTENSA
  if (s_raw_crash_data.pseudo_excause) {
    // SoC-level panic: watchdog, cache error, etc.
    // Keep in sync with ESP-IDF's PANIC_RSN_* defines
    static const char *const PSEUDO_REASON[] = {
        "Unknown reason",                 // 0
        "Unhandled debug exception",      // 1
        "Double exception",               // 2
        "Unhandled kernel exception",     // 3
        "Coprocessor exception",          // 4
        "Interrupt wdt timeout on CPU0",  // 5
        "Interrupt wdt timeout on CPU1",  // 6
        "Cache error",                    // 7
    };
    uint32_t cause = s_raw_crash_data.cause;
    if (cause < sizeof(PSEUDO_REASON) / sizeof(PSEUDO_REASON[0]))
      return PSEUDO_REASON[cause];
    return PSEUDO_REASON[0];
  }
  // Real Xtensa exception
  static const char *const REASON[] = {
      "IllegalInstruction",
      "Syscall",
      "InstructionFetchError",
      "LoadStoreError",
      "Level1Interrupt",
      "Alloca",
      "IntegerDivideByZero",
      "PCValue",
      "Privileged",
      "LoadStoreAlignment",
      nullptr,
      nullptr,
      "InstrPDAddrError",
      "LoadStorePIFDataError",
      "InstrPIFAddrError",
      "LoadStorePIFAddrError",
      "InstTLBMiss",
      "InstTLBMultiHit",
      "InstFetchPrivilege",
      nullptr,
      "InstrFetchProhibited",
      nullptr,
      nullptr,
      nullptr,
      "LoadStoreTLBMiss",
      "LoadStoreTLBMultihit",
      "LoadStorePrivilege",
      nullptr,
      "LoadProhibited",
      "StoreProhibited",
  };
  uint32_t cause = s_raw_crash_data.cause;
  if (cause < sizeof(REASON) / sizeof(REASON[0]) && REASON[cause] != nullptr)
    return REASON[cause];
#elif CONFIG_IDF_TARGET_ARCH_RISCV
  // For SoC-level panics (watchdog, cache error), mcause holds IDF-internal
  // interrupt numbers, not standard RISC-V cause codes. The exception type
  // field already identifies these, so just return null to use the type name.
  if (s_raw_crash_data.pseudo_excause)
    return nullptr;
  static const char *const REASON[] = {
      "Instruction address misaligned",
      "Instruction access fault",
      "Illegal instruction",
      "Breakpoint",
      "Load address misaligned",
      "Load access fault",
      "Store address misaligned",
      "Store access fault",
      "Environment call from U-mode",
      "Environment call from S-mode",
      nullptr,
      "Environment call from M-mode",
      "Instruction page fault",
      "Load page fault",
      nullptr,
      "Store page fault",
  };
  uint32_t cause = s_raw_crash_data.cause;
  if (cause < sizeof(REASON) / sizeof(REASON[0]) && REASON[cause] != nullptr)
    return REASON[cause];
#endif
  return "Unknown";
}

// Exception type names matching panic_exception_t enum
static const char *get_exception_type() {
  static const char *const TYPES[] = {
      "Debug exception",  // PANIC_EXCEPTION_DEBUG
      "Interrupt wdt",    // PANIC_EXCEPTION_IWDT
      "Task wdt",         // PANIC_EXCEPTION_TWDT
      "Abort",            // PANIC_EXCEPTION_ABORT
      "Fault",            // PANIC_EXCEPTION_FAULT
  };
  uint8_t exc = s_raw_crash_data.exception;
  if (exc < sizeof(TYPES) / sizeof(TYPES[0]))
    return TYPES[exc];
  return "Unknown";
}

// Intentionally uses separate ESP_LOGE calls per line instead of combining into
// one multi-line log message. This ensures each address appears as its own line
// on the serial console, making it possible to see partial output if the device
// crashes again during boot, and allowing the CLI's process_stacktrace to match
// and decode each address individually.
void crash_handler_log() {
  if (!s_crash_data_valid)
    return;

  ESP_LOGE(TAG, "*** CRASH DETECTED ON PREVIOUS BOOT ***");
  const char *reason = get_exception_reason();
  if (reason != nullptr) {
    ESP_LOGE(TAG, "  Reason: %s - %s", get_exception_type(), reason);
  } else {
    ESP_LOGE(TAG, "  Reason: %s", get_exception_type());
  }
  ESP_LOGE(TAG, "  PC:  0x%08" PRIX32 "  (fault location)", s_raw_crash_data.pc);
  uint8_t bt_num = 0;
  for (uint8_t i = 0; i < s_raw_crash_data.backtrace_count; i++) {
    uint32_t addr = s_raw_crash_data.backtrace[i];
#if CONFIG_IDF_TARGET_ARCH_RISCV
    // Register-sourced entries (MEPC/RA) are trusted; only filter stack-scanned ones.
    if (i >= s_raw_crash_data.reg_frame_count && !is_return_addr(addr))
      continue;
#endif
#if CONFIG_IDF_TARGET_ARCH_RISCV
    const char *source = (i < s_raw_crash_data.reg_frame_count) ? "backtrace" : "stack scan";
#else
    const char *source = "backtrace";
#endif
    ESP_LOGE(TAG, "  BT%d: 0x%08" PRIX32 "  (%s)", bt_num++, addr, source);
  }
  // Build addr2line hint with all captured addresses for easy copy-paste
  char hint[256];
  int pos = snprintf(hint, sizeof(hint), "Use: addr2line -pfiaC -e firmware.elf 0x%08" PRIX32, s_raw_crash_data.pc);
  for (uint8_t i = 0; i < s_raw_crash_data.backtrace_count && pos < (int) sizeof(hint) - 12; i++) {
    uint32_t addr = s_raw_crash_data.backtrace[i];
#if CONFIG_IDF_TARGET_ARCH_RISCV
    if (i >= s_raw_crash_data.reg_frame_count && !is_return_addr(addr))
      continue;
#endif
    pos += snprintf(hint + pos, sizeof(hint) - pos, " 0x%08" PRIX32, addr);
  }
  ESP_LOGE(TAG, "%s", hint);
}

}  // namespace esphome::esp32

// --- Panic handler wrapper ---
// Intercepts esp_panic_handler() via --wrap linker flag to capture crash data
// into NOINIT memory before the normal panic handler runs.
//
extern "C" {
// NOLINTBEGIN(bugprone-reserved-identifier,cert-dcl37-c,cert-dcl51-cpp,readability-identifier-naming)
// Names are mandated by the --wrap linker mechanism
extern void __real_esp_panic_handler(panic_info_t *info);

void IRAM_ATTR __wrap_esp_panic_handler(panic_info_t *info) {
  // Save the faulting PC and exception info
  s_raw_crash_data.pc = (uint32_t) info->addr;
  s_raw_crash_data.backtrace_count = 0;
  s_raw_crash_data.reg_frame_count = 0;
  s_raw_crash_data.exception = (uint8_t) info->exception;
  s_raw_crash_data.pseudo_excause = info->pseudo_excause ? 1 : 0;

#if CONFIG_IDF_TARGET_ARCH_XTENSA
  // Xtensa: walk the backtrace using the public API
  if (info->frame != nullptr) {
    auto *xt_frame = (XtExcFrame *) info->frame;
    s_raw_crash_data.cause = xt_frame->exccause;
    esp_backtrace_frame_t bt_frame = {
        .pc = (uint32_t) xt_frame->pc,
        .sp = (uint32_t) xt_frame->a1,
        .next_pc = (uint32_t) xt_frame->a0,
        .exc_frame = xt_frame,
    };

    uint8_t count = 0;
    // First frame PC
    uint32_t first_pc = esp_cpu_process_stack_pc(bt_frame.pc);
    if (is_code_addr(first_pc)) {
      s_raw_crash_data.backtrace[count++] = first_pc;
    }
    // Walk remaining frames
    while (count < MAX_BACKTRACE && bt_frame.next_pc != 0) {
      if (!esp_backtrace_get_next_frame(&bt_frame)) {
        break;
      }
      uint32_t pc = esp_cpu_process_stack_pc(bt_frame.pc);
      if (is_code_addr(pc)) {
        s_raw_crash_data.backtrace[count++] = pc;
      }
    }
    s_raw_crash_data.backtrace_count = count;
  }

#elif CONFIG_IDF_TARGET_ARCH_RISCV
  // RISC-V: capture MEPC + RA, then scan stack for code addresses
  if (info->frame != nullptr) {
    auto *rv_frame = (RvExcFrame *) info->frame;
    s_raw_crash_data.cause = rv_frame->mcause;
    uint8_t count = 0;

    // Save MEPC (fault PC) and RA (return address)
    if (is_code_addr(rv_frame->mepc)) {
      s_raw_crash_data.backtrace[count++] = rv_frame->mepc;
    }
    if (is_code_addr(rv_frame->ra) && rv_frame->ra != rv_frame->mepc) {
      s_raw_crash_data.backtrace[count++] = rv_frame->ra;
    }

    // Track how many entries came from registers (MEPC/RA) so we can
    // skip return-address validation for them at log time.
    s_raw_crash_data.reg_frame_count = count;

    // Scan stack for code addresses — captures broadly during panic,
    // filtered by is_return_addr() at log time when flash is accessible.
    auto *scan_start = (uint32_t *) rv_frame->sp;
    for (uint32_t i = 0; i < 64 && count < MAX_BACKTRACE; i++) {
      uint32_t val = scan_start[i];
      if (is_code_addr(val) && val != rv_frame->mepc && val != rv_frame->ra) {
        s_raw_crash_data.backtrace[count++] = val;
      }
    }
    s_raw_crash_data.backtrace_count = count;
  }
#endif

  // Write version and magic last — ensures all data is written before we mark it valid
  s_raw_crash_data.version = CRASH_DATA_VERSION;
  s_raw_crash_data.magic = CRASH_MAGIC;

  // Call the real panic handler (prints to UART, does core dump, reboots, etc.)
  __real_esp_panic_handler(info);
}

// NOLINTEND(bugprone-reserved-identifier,cert-dcl37-c,cert-dcl51-cpp,readability-identifier-naming)
}  // extern "C"

#endif  // USE_ESP32_CRASH_HANDLER
#endif  // USE_ESP32