import logging
from typing import Any

import esphome.config_validation as cv
from esphome.const import CONF_INPUT, CONF_MODE, CONF_NUMBER, CONF_SCL, CONF_SDA
from esphome.pins import check_strapping_pin

# https://github.com/espressif/esp-idf/blob/master/components/esp_hal_i2c/esp32c5/include/hal/i2c_ll.h
_ESP32C5_I2C_LP_PINS = {"SDA": 2, "SCL": 3}

_ESP32C5_SPI_PSRAM_PINS = {
    16: "SPICS0",
    17: "SPIQ",
    18: "SPIWP",
    19: "VDD_SPI",
    20: "SPIHD",
    21: "SPICLK",
    22: "SPID",
}

_ESP32C5_STRAPPING_PINS = {2, 7, 27, 28}

_LOGGER = logging.getLogger(__name__)


def esp32_c5_validate_gpio_pin(value: int) -> int:
    if value < 0 or value > 28:
        raise cv.Invalid(f"Invalid pin number: {value} (must be 0-28)")
    if value in _ESP32C5_SPI_PSRAM_PINS:
        raise cv.Invalid(
            f"This pin cannot be used on ESP32-C5s and is already used by the SPI/PSRAM interface (function: {_ESP32C5_SPI_PSRAM_PINS[value]})"
        )

    return value


def esp32_c5_validate_supports(value: dict[str, Any]) -> dict[str, Any]:
    num = value[CONF_NUMBER]
    mode = value[CONF_MODE]
    is_input = mode[CONF_INPUT]

    if num < 0 or num > 28:
        raise cv.Invalid(f"Invalid pin number: {num} (must be 0-28)")
    if is_input:
        # All ESP32 pins support input mode
        pass

    check_strapping_pin(value, _ESP32C5_STRAPPING_PINS, _LOGGER)
    return value


def esp32_c5_validate_lp_i2c(value):
    lp_sda_pin = _ESP32C5_I2C_LP_PINS["SDA"]
    lp_scl_pin = _ESP32C5_I2C_LP_PINS["SCL"]
    if int(value[CONF_SDA]) != lp_sda_pin or int(value[CONF_SCL]) != lp_scl_pin:
        raise cv.Invalid(
            f"Low power i2c interface is only supported on GPIO{lp_sda_pin} SDA and GPIO{lp_scl_pin} SCL for ESP32-C5"
        )
    return value